Download PRV DDE I/O Server

The KD485-ADE multidrop nodes are available from KK-Systems in U.K. Check
http://www.kksystems.com/ for pricing and local distributor information. Power supply needs
to give 12VDC/200mA. Startup current ~500mA.
4.3
Hardware requirements, TCP/IP (method 3)
If TCP/IP communications are to be used, a network card with appropriate settings in Windows
for TCP/IP is required. Further a terminal server is required.
The Net Controller available from WHI-konsult (http://www.whi.se/) has been tested
successfully with the I/O Server, but any terminal server that can be set up with raw TCP ports
will do.
TCP/IP
HUB
Ethernet
Ethernet
Terminal Server
RS-232
PRV
There are also several models that use TCP/IP as transport media, but emulates COM-ports in
Windows (i.e. Digis' EtherLite etc). These may also be used, but should, and could, not be set
up as TCP/IP connected devices.
TroSoft PRV DDE I/O Server - Installation and User Manual
12