Download Rev AB - AMETEK Programmable Power

AC Source SCPI Programming Manual
California Instruments
9.5 MIL-STD 704E (-704 Option)
MIL-STD 704 tests for revisions D and E only can be executed remotely from the GPIB or
RS232 using the following command tree. See the iX Series I User Manual (P/N 7000-970)
or iX Series II User Manual (P/N 4994-970) for more details about each 704 test step.
MIL-STD 704 tests for revisions A, B, C and F are implemented only through the CIGui32
Windows software provided with each AC power source. As such, there are no SCPI
commands that apply to these revisions of MIL-STD 704 and they cannot be executed from
the front panel. See the iX Series User Manual (P/N 7000-970) or iX Series II User Manual
(P/N 4994-970) for more details on performing tests to these revisions of the standard.
This capability requires the presence of the –704 option.
9.5.1 AC SYSTEM
:MIL704
:VERSion
D|E
:SSTate
:VOLT
[:LEVel]
:MODulation
:UNBalance
:PHASe
[:DIFFerence]
:WAVeform
[:DISTortion]
:FREQuency
[:LEVel]
:MODulation
:TRANsient
:VOLTage
[:LOW]
:HIGH
:FREQuency
[:LOW]
:HIGH
:ABNormal
:VOLTage
[:UNDer]
:OVER
:FREQuency
[:UNDer]
:OVER
:EMERgency
:VOLTage
:FREQuency
iM Series / i Series / iX Series
190