Download 1 Gorgon G3O3

Transcript
SPECIFICATIONS
SPECIFICATIONS
Parameter
Consumption in security mode, мА
��
Main unit supply voltage, V
Radio channel frequency��, ��
���
Hz
Frequency deviation��, ��
���
Hz
Emission power��, �
���
Wt
Operative temperature range
Remote control encoding type
Max. peak load current , switched in output:
- Siren, А
�
- Warning lights, А
�
- Interlock circuit, А
�
- Door locks, �
А
- Remote radio alert channel, timer channel №3, А
�
- Timer channel №1, А
�
- Timer channel №2, А
�
Remote control buttons qty.
Remote control operation range (depends on the battery charge level), м
�
Shock sensor
Dimensions�:
- �����������
Main unit��, ��
мм
- ����������������
Remote control��, мм
��
- ���������
Package��, мм
��
Electric circuits protection�:
- �������������
Feed circuits
- ���������������
Output circuits
- ��������������
Input circuits
- ��������������
Repolarisation
Precious metals content
Remote���������
�������� �����
control�
feed�
Gross weight, not more than, kg
Description
Not more than� ��
20
9..15
433,92
433,075�������������
Hz�����������
����������
to��������
434,79� ���
MHz
Less than���
10
–40°С to�
��� +85°С
�����
Dynamic� «Keeloq»
��������� ®
�
3
7,5+7,5
25
15
0,�3
0,3
0,3
3
30
Built-in, adaptive
9�������
0������
×9����
5���
��
29
62������
�����
2����
9��
11
140��������
×1������
95����
���
105
Fuses
Schematic ground� ���������������
fault����������
shielding
���������
Schematic overload/ground fault
shielding
Schematic repolarization�
shielding
No
А27, 12�
V
0,��
98
NOTE: Dimensions can slightly vary depending on the applied model, but without any negative affect
on the declared characteristics.
STATUS INDICATOR READINGS
Signals of the LED help determine the mode in which the system is in the given moment:
• Single short red flashes – the system is armed;
• Constantly alight with red – the system is getting ready for automatic arming;
• By-turn blinking with red and green – the system is disarmed, but immobilizer is still active;
• Not alight – the system is disarmed, immobilizer deactivated or the system is in the technical
maintenance mode (with ignition turned on);
• Constant dim green light while ignition is active – the system is in the maintenance mode;
Gorgon G3O3