Download VTB-COM User Manual

The CAN Bus interface provides 4 independent channels ( 1 channel for VTB-miniCOM ) to sensor networks. In
the gateway mode, all CAN Bus messages are transferred over TCP/IP between the CAN network and the
controller platform, e.g., PC/PLC/DCS in both directions.
The USB Host interface supports USB1.0 standard with data rate of 12 Mbit/s (Full-Bandwidth) for interfacing to a
variety of off-the-shelf USB devices.
The USB Device interface supports USB1.0 standard with data rate of 12 Mbit/s (Full-Bandwidth).
VTB-COM is recognized by a personal computer as a serial port device over the Ethernet or USB Device
interface (USB Connector A on the personal computer and USB Connector B on VTB-COM).
9