1
Download Display - Internet
Transcript
List of Action Numbers 01/2008 No. 62 Definitions: Deactivate skip slash blocks (VDI signal: skip block) Not permitted if: 1. The nesting depth is too great Possible actions: 1. Wait until previous ASUB has finished or cancel program No. 63 Definitions: Activate test run. (VDI signal: rapid traverse override) Not permitted if: 1. The nesting depth is too great 2. If there is a reorganize brake error Possible actions: 1. Wait until previous ASUB has finished or cancel program 2. Cancel program No. 64 Definitions: Deactivate test run. (VDI signal: rapid traverse override) Not permitted if: 1. The nesting depth is too great 2. If there is a reorganize brake error Possible actions: 1. Wait until previous ASUB has finished or cancel program 2. Cancel program No. 65 Definitions: Activate read-in disable for main run block. (VDI signal: read-in disable) Should not occur in any alarm No. 66 Definitions: Deactivate read-in disable for main run block. (VDI signal: read-in disable) Should not occur in any alarm No. 67 Definitions: Stop at the block boundary (alarm) Should not occur in any alarm No. 68 Definitions: Stop all axes (alarm) Should not occur in any alarm No. 69 Definitions: 3-934 Activate program test. (VDI signal: program test) Not permitted if: 1. Tool management is active 2. The NCK channel status is not Ready Possible actions: 1. Backup tool data 2. Cancel program or process with reset button or wait for end of program © Siemens AG 2008 All Rights Reserved SINUMERIK 840D sl, 840Di sl, SINAMICS, Diagnostics Manual (DAsl), 01/2008
