Download vtexswitch driver programmer`s manual

www.vtiinstruments.com
Control slots 1, 2, and 3 using Individual Relay Mode
C++/COM:
driver->Initialize ("TCPIP::10.1.0.87::INSTR", queryID, reset, "DriverSetup= slots=(1-3),
IndividualRelayMode = True");
C:
status = vtex_InitWithOptions ("TCPIP::10.1.0.87::INSTR", queryID, reset, "DriverSetup= slots=(13), IndividualRelayMode = True", &viClassSessionHandle);
Using IndividualRelayMode during a simulation
C++/COM:
driver->Initialize ("TCPIP::10.1.0.87::INSTR", queryID, reset, "Simulate=true, DriverSetup=
slots=(1-3 = ex1200-3096), IndividualRelayMode = True");
C:
status = vtex_InitWithOptions ("TCPIP::10.1.0.87::INSTR", queryID, reset, "Simulate=true,
DriverSetup= slots=(1-3 = ex1200-3096), IndividualRelayMode = True",
&viClassSessionHandle);
Invalid – True or False not indicated for Individual Relay Mode
C++/COM:
driver->Initialize ("TCPIP::10.1.0.87::INSTR", queryID, reset, "DriverSetup= slots=(1-3),
IndividualRelayMode = 2");
C:
status = vtex_InitWithOptions ("TCPIP::10.1.0.87::INSTR", queryID, reset, "DriverSetup= slots=(13), IndividualRelayMode = 2", &viClassSessionHandle);
VTEX Switch Driver Programmer’s Manual
15