Download USER MANUAL

Chapter 4: Using the interfaces
Making or receiving a phone call with the EXPLORER™ 527
Making a call
You have two methods for making a call:
•
Short Dial. If the number is in the phone book of the EXPLORER 527, you can use the Short
Dial number, which is found in the first column of the phone book in the web interface. See
Short dial on page 67.
Simply dial 0 <Short Dial> #.
Example:
•
To call entry number 4 in the phone book,
dial 04 #.
Manual Dial. To make a call, dial
00 <country code> <phone number> #.
Example:
To call Thrane & Thrane in Denmark (+45 39558800), dial 00 45 39558800 #
If there was an error establishing the connection, the web interface and the display of the
EXPLORER 527 show an error message. Refer to the Troubleshooting Guide on page 113.
Receiving a call
To be able to receive a call, the phone must be connected to the relevant interface on the
EXPLORER 527.
By default, all devices connected to the Phone/Fax interface will ring when one of the mobile
subscriber numbers is called. Note, however, that this depends on the call type settings. Refer to
Selecting the incoming call type on page 46.
Information of missed calls is stored in the call log of the EXPLORER 527. You can view the call log
with the display menu system or the web interface. See Calls menu on page 34 or Viewing the lists
of calls on page 69.
TT 98-123789-D
Using a phone or fax machine
49