Download AGForm3D User`s Manual

Field Tools
Viewing and Changing Options
AGForm-3D options define Design View grid and contour
parameters, GPS antenna, radio, survey and connection settings,
and sets the units for the project.
To view or change options, click Tools->Options. The Options
dialog box displays (Figure 4-27). See the following sections for
more information on the Options tabs.
• “Field Options” on page 4-17
• “Antenna Options” on page 4-18
• “Radios Options” on page 4-19
• “Survey Options” on page 4-21
• “Connection Options” on page 4-22
• “Units Options” on page 4-23
Figure 4-27. Open Options Dialog Box
4-16
Topcon
AGForm-3D User’s Manual