Download RT-300 User Manual
Transcript
Operating Manual Bearing System RT 300 3.1.3 LC -Graphic-Display The centered LC-Display is showing all relevant bearing data, adjustments and status reports. Background brightness may be adjusted in menu: LIGHT\DIM LCD BACKL, contrast in menu: LIGHT\LCD CONTRAST. When adjusting, the range of adjustment will be displayed as well as the active keys and their function. In menu-mode all selecting fields and adjustments are displayed. In bearing-mode the graphic display is divided into following fields: 3.1.4 Digital Bearing-value Display Receiving a bearable signal, the Indicating 28 secs bearing value will appear in the since last bearing display`s lower left area with a resolution of 1°. If there is no more signal available, the display will start flashing for a certain time, alternately showing in the display „LAST“ (adjustable in menu: SETUP\ BEARING\ LAST_TIME). After that the information, „last bearing“ will be shown for 10 min., indicating the duration since the last bearing. After 10 min without signal three dashes are displayed. Fig. 8 Fig. 9 3.1.5 Direction of reference The selected direction of referencce is displayed left of the digital bearing value. Following directions of reference may be selected: Fig. 10 Display REL MAG Direction of reference relative magnetic Nord TRU true (geographic) North Remarks bearing relative to longitudinal axis of antenna (North – South) bearing relative to magnetic North optional internal compass module required or compass information via NMEA interface required, input of variation(see 3.3.2.5.4.5.3) bearing relative to geographic North optional internal compass module required or compass information via NMEA interface required, input of variation(see 3.3.2.5.4.5.3) Issue: 2013/03/04 [Rev 1.03.a] Page 16 of 72 12-9-1-0013-3-1-61