Download User Manual - Advanced Technology Services
Transcript
December 2008 12" Display Models Table 4-4: Enclosure Selection — 12" Display Models Enclosure Size Average Internal Temperature Rise at Rated Heat Output 20 x 20 x 6 10.5°C 20 x 24 x 6 9.5°C 20 x 20 x 8 9.5°C 20 x 24 x 8 8°C 15" Display Models Table 4-5: Enclosure Selection — 15" Display Models Enclosure Size Average Internal Temperature Rise at Rated Heat Output 20 x 24 x 6 12.5°C 20 x 20 x 8 12°C 20 x 24 x 8 10°C 24 x 24 x 8 9.5°C Blind Node Models Table 4-6: Enclosure Selection — Blind Node Models Enclosure Size Average Internal Temperature Rise at Rated Heat Output 16 x 20 x 4 9.5°C 16 x 20 x 6 9°C 20 x 20 x 6 6.5°C 20 x 24 x 6 6°C Notes: ● These tables are based on the following assumptions: – No additional peripherals are installed – Enclosure is fabricated from cold rolled steel – All sides of the enclosure are non-insulated (free standing) – Recommended minimum clearance between the PanelMate ePro PS unit and the top and bottom of the enclosure – No other heat-generating equipment is installed in the enclosure – Maximum CPU usage ● The temperature rise shown represents the temperature rise in the enclosure above the outside temperature. For example: if the temperature outside the enclosure is 35°C and the temperature rise in the enclosure is 10°C, then the average temperature inside the enclosure will be 45°C. Keep in mind that there will be areas warmer than the average inside the enclosure.