Download User Manual

26
6
System Integration
You need a client program to connect to the SG-15.
The widely used 'telnet' program is such a program.
You can connect to the SG-15 by entering:
telnet 192.168.3.227 9101
As a result, the 'Offline' message on the SG-15 should disappear.
7
Now you can enter characters on your keyboard, which should
appear on the SG-15's display.
Also, when you scan a barcode with the SG-15, it should appear on
your monitor.
8.
See appendix B for how to do more on the SG15's display.
Some notes:
1. Regarding the Network Connection Properties of your PC:
You may have to turn OFF DHCP and make sure the IP address of your PC
is in the same IP range as the Shuttle you want to communicate with.
For instance by giving your PC IP address: 192.168.3.1
2. If you have a firewall running on your PC, make sure it's not blocking the
communication in any way.