Download Juzt-Reboot® User`s Manual

Juzt-Reboot®
B.
Instant System/Data Recovery
For JR-PCIe, JR-PCIe-WOL, JR-PCI-VT and JR-SW-VT (Vista):
Click “Start Run... or type in Run at the Start Search field”. In “Run”
dialog box, type in “A:\INSTALL” or “E:\INSTALL” as shown below:
E:\ Represents the
drive letter of the CDROM drive.
A:\ Represents
drive letter of
Floppy Drive.
the
the
®
Click “OK” to install Juzt-Reboot Vista driver.
For newer version of driver, the next Windows message box would be:
Note:
Juzt-Reboot® will disable “User Account
Control (UAC)” to allow installation
program run in Administrator mode to
avoid any conflicts. IF Juzt-Reboot® is not
functioning after installation, please
uninstall the JR Win Driver and install it in
Windows Safe Mode.
When Fixed IP is detected
Note:
The default setting for "Change Computer
Name" and "IP Address" is [Enable]. This
setting is prepared in advance for "NetClone" function. If DISABLE the check box
while
installing, the
"Auto
Allocate
Computer Name" and "Auto Allocate
IP" for the clients after performing the
"Net-Clone" task will not works. If it is with
DHCP, the IP and the network are not
necessary for "Auto IP Allocation". Only
the fixed IP would be available for the
"Auto IP" check box. (See Net-Clone
15.3.3 Send Command IP Allocate).
When Dynamic IP DHCP is detected
After setup has completed, click OK
to restart the computer.
16