Download PresencePLUS P4 EDGE User`s Manual

User’s Manual
Edge Tool Setup
Edge Tool Configuration
Edge Tool Applications:
•
Measure the height and width of a part
•
Count pins on a resistor or IC
•
Measure the height of a needle
•
Measure the deflection of an automotive gauge
•
Detect the edge of a web
•
Verify that a bottle cap is on completely
o
Name (default: EDGE_1, EDGE_2)
- Used to rename the tool.
- The name can have only alphanumeric characters or underscores and no spaces.
Draw ROI button
- Allows an ROI to be added.
- Edge tool uses a linear ROI. See Region of Interest (ROI) (in Section 6, Tools
Screen) on page 52.
Delete button
- Removes the ROI from the Image window.
- The active tool (red ROI on the screen) is removed.
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
01/05
P/N 120413
71