Download Operating Manual SH(NA)

APPENDICES
MELSOFT
Appendix 3 PLC CPU Version Correspondence Table
3.1 QnACPU function version
A
QnA
FX
When using the functions shown in the table, use the module for function version B.
To use the functions in this manual listed following, each version of QnACPU (except
Q4ARCPU), Ethernet interface module, and CC-Link system master/local modules
have restrictions. (See Appendix 3.2 for more information about Q4ARCPU.)
If there is a version higher than those listed in the table, the corresponding functions
can be used.
PLC
Ethernet
Q2ACPU,Q2ACPUS1,
AJ71QE71(B5),
Q3ACPU,Q4ACPU,
A1SJ71QE71-B2,
Module
Function
CC-Link
Q2AS(H)CPU,Q2AS(H)S1 A1SJ71QE71-B5
Local device
AJ61QBT11,
A1SJ61QBT11
9707B or later
Monitoring/testing
High-speed communication
9707B or later
Ethernet parameters
9707B or later
CC-Link parameters
9707B or later
9707B or later
9707B or later
: Irrelevant function
POINT
• When using the functions above, use a module that has the following code
(9707B or later) inscribed in the DATE entry on the ratings nameplate.
MITSUBISHI
PROGRAMMABLE CONTROLLER
CPU UNIT
MODEL
DATE
9707
DATE
B
9707
B
MITSUBISHI ELECTRIC CORPORATION JAPAN
80992D01JH01
Year/month of
manufacture
Appendix - 25
Function version
MITSUBISHI ELECTRIC
Year/month of
manufacture
80992D008H3B
Function version
Appendix - 25