Download AIR Transfuser User Guide

Maximizer
Use the Maximizer effect to apply peak-limiting and sound-maximizing to the audio signal.
1.
2.
Mode – The Mode setting lets you select any of the following compression modes for the
Maximizer:
•
Hard: Provides hard peak-limiting.
•
Soft: Provides softer peak-limiting.
Release – The Release control sets how long it takes for the Maximizer to ease off of its
attenuation after the input signal drops below the threshold level. Since the Maximizer has
an attack time of zero milliseconds, the Release control has a noticeable effect on the
character of the limiting.
In general, if you are using heavy limiting, use proportionally longer release times in order
to avoid pumping that may occur when the Maximizer is forced to jump back and forth
between limited and unlimited signal levels.
183