Download Manual MAXinBOX 8 v1.1 Ed.b

MAXinBOX 8
The following parameters add functionality or special features to both shutter types
(with or without slats):
Status object: this function provides a 1-byte communication object ("[CX]
Current Shutter Position") which will show, at any time, the exact position of
the shutter in percentage (%). This object returns the value “0” (or 0%) when
the shutter in completely up and “255” (or 100%) when it is completely down.
The remaining values represent intermediate positions.
It is possible to set, by parameter, whether the shutter position will be sent
every second or not. This is done by enabling or disabling “Send current
shutter position every second while moving?”, which appears once the
“Status Object” parameter has been enabled.
For Blinds with slats, the "[CX] Current Slats Position" 1-byte object is also
provided. It will show the value “0” (0%) when the slats are completely "up"
and the value “255” (100%) when the slats are completely "down".
Precise control: this function makes it possible to actually move the shutter
to any position via a 1-byte communication object ("[CX] Shutter
Positioning", in percentage). Every time MAXinBOX 8 receives a new
percentage value through this object (e.g. 50%), the shutter moves to the
corresponding position (e.g., the central position).
For blinds with slats, the actuator also implements the "[CX] Slats
Positioning" 1-byte object for setting the desired position (in percentage) for
the slats.
http://www.zennio.com
Technical Support: http://zennioenglish.zendesk.com
27