Download User`s manual
Transcript
Castor manual deel_1 03-11-2000 10:06 12 Pagina 12 Installing the MaxiScan 2400 VS The MaxiScan 2400 VS is designed to be installed horizontally (in the counter). Instructions for installation are given in Section 2.1. Due to many POS systems on the market, a large number of communication cables is available. Make sure that you have the right cable to connect the scanner to your POS or computer. NOTES ■ The scanner and the host system must be switched off before starting the installation of the scanner. By following this precaution you prevent any electrical damage. ■ You are advised to install the scanner in an air circulated place out of direct sunlight. 2.1 INSTALLING THE SCANNER IN COUNTER Follow these steps to install the scanner in the counter: 1. Locate the optimum scanner position in the counter surface. Pay attention to the product flow, distance to the counter edge and convenience for the operator. 2. Choose one of the following mounting options to install the Maxiscan 2400 VS: A. Using the bottom of the Maxiscan 2400 VS as support, B. Using the horizontal mount (separately ordered). A. Using the bottom of the Maxiscan 2400 VS as support - Cut a hole in the counter surface following the illustration below. - Design a supporting shelf following the illustration precisely. SIDE VIEW 75 mm 206 mm 1. Hole in Counter 241 mm 2. Supporting shelf