Download - Scientific Systems

SOLVENT SELECTION MENU (Screen Three)
Solvent Type
Displays the current solvent type
CompressFactor
Displays the corresponding solvent compressibility
factor
This Solvent Selection Screen menu is accessed by pressing the Mode key
after the Cursor is on the Low position from the previous screen two.
Mode key moves from SolventType to CompressFactor.
Right and left arrows (<>)move the cursor to the desired place.
Arrow keys and +/- keys function similar to the first mode to change the
solvent type or the CompressFactor values. There are 6 pre-defined
solvent types, which are Water, THF, IPA, Acetonitrile (ACN), Methanol,
and Hexane. The corresponding compressibility factor number will be
displayed on the low position while the solvent type is cycled through.
The Solvent Compressibility ranges from 0 to maximum of 250. When the
number is changed, the solvent type will display “Other” except for the
above pre-defined solvent types.
The pump can be run from this screen by pressing the Run/Stop button.
The next menu screen is accessed by pressing the Mode key after the
Cursor is on the Low position on this screen.
3-3