Download User Manual

ADT-CNC4240 铣 床 数 控 系 统
Unit
：
LOGIC VOLTAGE LEVEL
User
：
Super Administrators
Initialization
：
0
Effective time
：
Immediately
Explain
：
After this parameter is set and used, the System will
automatically use phase Z for locating in mechanical zero
mode. It is called “servo zero” localization. Under this
mode, the precision of repeated returning to zero
positioning depends on the precision of the servo
positioning, so normally we suggest start this
function when use the servo. Because the stepper
motor do not has the coder, it can not start this
function, or there will be a fault when the tool return
to zero it can not find signal.
017
X-axis positive limit of hardware(restart)
018
X-axis negative limit of hardware(restart)
019
X-axis limit the effective signal(restart)
020
Y-axis positive limit of hardware(restart)
021
Y-axis negative limit of hardware(restart)
022
Y-axis limit the effective signal(restart)
023
Z-axis positive limit of hardware(restart)
024
Z-axis negative limit of hardware(restart)
025
Z-axis limit the effective signal(restart)
026
A-axis positive limit of hardware(restart)
027
A-axis negative limit of hardware(restart)
028
A-axis limit the effective signal(restart)
Effective
range
Unit
：
0～ 1
：
Non
User
：
Super Administrators
Initialization
：
0
Adtech CNC Co.,LTD
- 168 -