Download User Manual

ADT-CNC4240 铣 床 数 控 系 统
In special cases, the compensation direction can be modified in the compensation
mode. However, such modification should not be executed in the start-up program segment
and its follow-up program segments. Once the compensation direction is changed, the
concept of inner and outer sides becomes ineffective. It is assumed the following
compensation are positive values.
¾ When the compensation is carried out normally and there is no intersection
When G41 and G42 are used for changing the offset direction from program segment A
to B, if the intersection of the compensation path is not needed, the vector can be made to
be vertical to the program segment B from B’s start point.
— linear----linear
Adtech CNC Co.,LTD
- 61 -