Download DTSXL Distributed Temperature Sensor Long Range

< PART – B Software >
B-56
● Enabling HTTPS
1.
2.
3.
4.
Put the DTSX3000 into maintenance state.
Transfer the SSL server certificate file to the DTSX3000 using SFTP or some other
means.
Log on to the DTSX3000 as a user with Admin authority.
Execute the following command to store the SSL server certificate file.
/usr/sbin/sslset SSL server certificate file
5.
6.
Select yes for HTTPS Enable.
Reboot the DTSX3000.
● Updating the SSL server certificate
1.
2.
3.
4.
Put the DTSX3000 into maintenance state.
Select no for HTTPS Enable.
Reboot the DTSX3000 (in maintenance state).
Perform the steps described for “Enabling HTTPS” above.
Tip
- An SSL server certificate must be addressed to the hostname (domain name) of the DTSX3000.
Example: dtsx3000.dtstest.com
- The host name and domain name in the network configuration (see Section B6.4.4, “Network
Configuration (Network).”) cannot be modified when HTTPS is enabled. To change the host name
or domain name, you need to disable HTTPS temporarily, modify the host name and domain name,
and then re-enable HTTPS.
- If HTTPS is enabled, you need to prefix the URL with “https://” when accessing the DTSX3000 from
a browser.
IM 39J06B40-01E