Download ADAP Software Operating Manual

6.2.3.
Configuring a Multiwavelength Quick Measurement
A multiwavelength Quick measurement performs up to eight absorbance
measurements for each well at different user-specified wavelengths.
Î The number of measurements that can be performed in a
multiwavelength measurement depends on the number of filters
installed in the instrument.
Î To perform Quick measurements using a standalone instrument (for
example, the Zenyth 340s), place the instrument in Remote Control
mode. Refer to the instrument user’s manual for more information about
Remote Control mode.
To perform a multiwavelength Quick measurement:
1.
From the Reading menu, choose Quick.
OR
Choose Quick-Read. Quick-Read appears (Figure 6-6).
Figure 6-6: Quick-Read
6-12
ADAP Software Operating Manual
ADAP