Download Installing the LRS-9424B

CHAPTER
6
C O N F I G U R I N G A N D R U N N I N G TE S T S
Creating New Test Steps
Starting a Test Scenario on a Fixture
Once the devices under test have been inserted into a fixture, the system is ready
to start testing these devices. The fixture maybe assigned to the desired test
scenario and the test scenario may be started on that fixture.
Prior to starting a test scenario, if the test scenario does not have a default device
type configured in the test scenario settings, the device type must be assigned to
the fixture.
The first method to start a test is to right-click on the fixture and choose the menu
item Start Test. This method opens a list of tests that may be started. Select the
desired test and enter any optional user information presented. Click the Start
Test button to start the test. The user may then be prompted with the device serial
numbers if ReliaTest is configured to require them.
The second method is to select the Existing Tests lists in the Control View and
click on the desired test scenario. With the test scenario selected, highlight test
desired fixture with the mouse and click the Add Selected Fixtures button. Click
the Start Test button to start the test. If the test scenario requires any optional
user information, a screen is presented for the user to enter the information. The
user may then be prompted with the device serial numbers if ReliaTest is
configured to require them.
Only one test scenario can be run on any given fixture at a time, but the same test
scenario configuration can be run simultaneously on as many fixtures as needed.
A completely configured test scenario is shown in Figure 6.14.
66 
LRS-9424B