Download SSA3030 Spectrum Analyzer User`s Manual - R

SIGLENT
[Mask]
[Config I/O►]
Set the value of subnet mask.
[Gate Way]
[Config I/O►]
Set the gateway address.
[GPIB Addr]
[Config I/O►]
Set the GPIB address of spectrum analyzer.
[Host IP]
[Config I/O►]
Set the host IP address.
[Host Port]
[Config I/O►]
Set the host port address.
[System]
Set the interface language, with Chinese as default.
[ Service► ]
[System]
Bring out the soft menu of system service.
[Back light]
[System]
Set the backlight brightness of LCD.
[
Language ]
Chinese
English
[Print Setting]
——
Bring out the soft menu related to print.
[File]
——
Bring out the soft menu for file management.
[ Catalog► ]
[File]
Used to check the stored files.
[ Save►]
[File]
Used to save files in the instrument or flash memory.
[ Delete► ]
[File]
Used to delete the selected file or all files.
[ Copy► ]
[File]
Copy the selected file to flash memory, or all files.
[ Refresh► ]
[File]
Check the latest stored files at the catalog mode.
[Select Page ]
[File]
Default is to select all in current page.
[ Select All ]
[File]
Default is to select all the files in the catalog.
[Save]
——
Used to store the data of current instrument into the
system memory.
[Preset]
——
Set the spectrum analyzer to the reset mode.
60