1
Download ArmorStart Distributed Motor Controller User Manual
Transcript
B-16 Bulletin 280G/281G CIP Information DOP Instances 1 and 2 Special Behavior Besides the sources that can affect output points 3 and 4, DOPs 1 and 2 can be affected by keypad inputs since they double as the Run Forward and Run Reverse outputs. This adds complexity to their behavior, so their behavior is defined in this section separately. The following State Transition Diagram is used for DOP Instances 1 and 2 Figure B.1 DOP Instances 1 and 2 Power Off Non-Existant Power Up Auto State = Auto Init Keyad "Hand" Button Pressed Hand State = Hand Stop Auto Hand Keyad "Auto" Button Pressed Auto State = Auto Init
