1
Download ArmorStart Distributed Motor Controller User Manual
Transcript
3-15 Bulletin 280G/281G Programmable Parameters Set to Defaults This parameter if set to 1 will set the device to the factory defaults 0=No Operation 1=Set to Defaults Base Enclosure Indicates the ArmorStart Base unit enclosure rating Bit 0 = IP67 Bit 1 = Nema 4X Bit 2 = SIL3/CAT4 Bit 3-15 = Reserved Base Options Indicates the options for the ArmorStart Base unit Bit 0 = Reserved Bit 1 = Reserved Bit 2 = CP Fuse Detect Bits 3-7 = Reserved Bit 8 = 10A Base Bit 9 = 25A Base Bit 10-15 = Reserved Wiring Options Bit 0 = Conduit Bit 1 = Round Media Bits 2-15 = 28xG Bits 3-15 = Reserved Starter Enclosure Bit 0 = IP67 Bit 1 = NEMA 4x Bit 2 = SIL3/CAT4 Bits 3-15 reserved Parameter Number 47 Access Rule GET/SET Data Type BOOL Group Misc. Units — Minimum Value 0 Maximum Value 1 Default Value 0 Parameter Number 56 Access Rule GET Data Type WORD Group Misc. Units — MinimumValue 0 Maximum Value 65535 Default Value 0 Parameter Number 57 Access Rule GET Data Type WORD Group Misc. Units — MinimumValue 0 Maximum Value 65535 Default Value 0 Parameter Number 58 Access Rule GET Data Type WORD Group Misc. Units — MinimumValue 0 Maximum Value 65535 Default Value 0 Parameter Number 59 Access Rule GET Data Type WORD Group Misc. Units — MinimumValue 0 Maximum Value 65535 Default Value —
