1
Download ArmorStart Distributed Motor Controller User Manual
Transcript
3-8 Bulletin 280G/281G Programmable Parameters Prod Assy Word 0 This parameter is used to build bytes 0-1 for produced assembly 120 Produced Assy Word 1 This parameter is used to build bytes 2-3 for produced assembly 120 Prod Assy Word 2 This parameter is used to build bytes 4-5 for produced assembly 120 Prod Assy Word 3 This parameter is used to build bytes 6-7 for produced assembly 120 Consumed I/O Size This parameter reflects the consumed I/O data size in bytes. Parameter Number 13 Access Rule GET/SET Data Type USINT Group DeviceNet Units — Minimum Value 0 Maximum Value 108 Default Value 1 Parameter Number 14 Access Rule GET/SET Data Type USINT Group DeviceNet Units — Minimum Value 0 Maximum Value 108 Default Value 4 Parameter Number 15 Access Rule GET/SET Data Type USINT Group DeviceNet Units — Minimum Value 0 Maximum Value 108 Default Value 5 Parameter Number 16 Access Rule GET/SET Data Type USINT Group DeviceNet Units — Minimum Value 0 Maximum Value 108 Default Value 6 Parameter Number 17 Access Rule GET Data Type USINT Group DeviceNet Units — Minimum Value 0 Maximum Value 8 Default Value 1
