Download Wireless Differential Pressure Transmitter

Transcript
Honeywell Industrial Wireless
7.4: Entering a 22-Point Curve
Wireless Differential Pressure Transmitter
If you are running WMT, a 22-point sensor offset curve may be entered
for the Transmitter. To do so, open the configuration dialog box. Once in
the configuration dialog box, click the Sensor Offset tab to bring up the
offset information as shown for Level in Figure 7.4.
Figure 7.4: Setting a 22-Point Curve Using
WMT
29 Rev. 5
08/06
User Manual