Download Installation manual

Maintenance
27.10 Door controller firmware control
If the door controllers DC12/DC22 and the PD40-EM/PD40-EM have firmware
version 1.20 or later, the Installer program can download new firmware via the
system bus. This requires that the units are on-line.
During download the door is unlocked if this is defined in the Security level in offline condition. All other selections results in a locked door.
27.11 Printout of system configuration
In the Installer program you can generate a graphic view of installed components
for easier control of e g current firmware versions etc. Proceed like this:
1. Open Installer [ 76] application.
2. Choose System >System information.
3. Click on Save as – as an image in JPG format is stored on disk.
27.12 Migrating from a Entro Lite system
When migrating from a SiPass Entro Lite system there are some considerations
must be taken:

The database used in SiPass Entro Lite allow for card holder names up to 50
character. When an import is done to SiPass Entro only the 32 first is imported.

If the Duress function is used (in the DC800 controller) this must be “moved” to
an IOR6 relay [ 93] controller and the SiPass Entro configured for that. This
applies even if the DC800 still is used as a door controller in the new system.

Also if the Alarm bypass function is used, considerations must be taken to
redesign the solution.
27.13 Uninstalling Entro
To uninstall the SiPass Entro, use the Windows system. There is no special menu
choice for uninstalling.
After uninstall the following files are kept for future references. If a complete
removal is desired, proceed as follows:
1. Go to the Windows users profile folder. Example for Win XP: C:\documents and
settings\Username\.
2. Remove all SiPass Entro files under “Application data” (dbpath.ini, entro.ini
database- and event files).
3. Go to C:\Program files\Common files.
4. Delete the complete folder “Bewator USB”
121
Building Technologies
Fire Safety & Security Products
020_SiPass_Entro_6_5_A24205-A335-B317_e_en
10.03.2010