Download Installation manual

Description of equipment
Door controllers with remote card readers. The door controllers are connected
to the segment controllers. A door controller controls one door where one or
two (in/out) remote card readers can be installed. This combination (split
installation) is designed for external doors or other doors with higher
requirements on function and security, e.g. alarm by-pass and door control.

1
2
3
1
2
4
5
6
4
5
7
8
9
7
8
3
9
A
0
B
A
0
B
6
1.
2
3
5
6
7
8
9
A
1
0
B
4
2.
3.
1.
DC22 with Magnetic card or proximity readers.
2.
DC12 with Proximity reader.
3.
DC12 with Hands-Free reader.
4.
DC12 with proximity reader (PP500) with PIN pad in small housing
4.

Proximity Codoor PD30-EM/PD40-EM. Electromechanical unit equipped with a
proximity reader for EM technology. Connects to the Segment controllers.
PD30-EM fits primary Scandinavian lock cases and PD40-EM the Euro
standard.

Radio link RF Codoor RF30-EM. Communicates wireless to the Segment
controllers directly or via RF9 routers.

RF9. Wireless router used for amplifying and routing the RF signal.

Door controllers without remote terminals. In some cases there is a need for
monitoring or opening a door by time schedule. The DC01 can be used as a
timer controlled relay or monitoring unit.
Door controller DC01
15
Building Technologies
Fire Safety & Security Products
020_SiPass_Entro_6_5_A24205-A335-B317_e_en
10.03.2010