1
Download Telindus 2400 series
Transcript
442 Telindus 2400 Chapter 13 Reference manual Configuration attributes telindus24xx/ip/router/routingFilter[ ]/filter Use this attribute to set up a routing update filter. Default:<empty> Range: table, see below Only the routes to networks that are specified in the filter table are forwarded. All other routes are blocked. If the filter table is empty, then all routes are forwarded. The filter table contains the following elements: Element Description network This is the IP address of the network. The address may be a (sub-)network address. It should match an entry in the telindus24xx/ip/router/routingTable status attribute of the Telindus 2400. mask This is the IP subnet mask of the network. By combin- Default:255.255.255.0 ing an IP address with a mask you can uniquely iden- Range: up to 255.255.255.255 tify a range of addresses. Default:0.0.0.0 Range: up to 255.255.255.255 Currently, the Telindus 2400 supports up to 5 routing update filters. Although you can add more than 5 routingFilter[ ] objects to the containment tree, no more than 5 will be active. Example This example shows a filter that only forwards the route to subnet 192.168.48.0.
