1
Download Telindus 2400 series
Transcript
142 Telindus 2400 Chapter 7 User manual 7.2.4 Configuring the encapsulation on the xDSL lines Imposing IP addresses on the remote in PPP As can be seen in 7.2.2 - Automatically obtaining IP addresses in PPP on page 141, in case of PPP the Telindus 2400 can learn IP addresses from the remote side. What is more, in case of PPP the Telindus 2400 itself can impose IP addresses on the remote. To impose IP addresses on the remote, proceed as follows: Step 1 Action On the Telindus 2400, configure a local and remote IP address on the PPP link. Refer to 7.2.3 - Configuring IP addresses in PPP on page 143. 2 On the remote device (e.g. a Telindus 1421 SHDSL), configure nor a local nor a remote address on the PPP link. ⇒Once the PPP handshake reaches the IPCP stage, the Telindus 1421 SHDSL will declare to the Telindus 2400 that it has no IP addresses on its PPP link. The Telindus 2400 on its turn will impose the local and remote IP address of the PPP link on the Telindus 1421 SHDSL. Note that should the IP configuration attributes acceptLocAddr and acceptRemAddr be present on the Telindus 1421 SHDSL, then they have to be set to enabled. Else the Telindus 1421 SHDSL will not accept the IP addresses imposed by the Telindus 2400. Example - imposing IP addresses on the remote in PPP
