Download User`s Reference

Code
Description
9
Specified logical drive size too big—You specified a logical drive size that is
larger than the maximum size allowed for this logical drive.
10
Number of drives do not match the logical drive type—The number of drives
you selected is invalid for the type of logical drive specified.
11
Unable to initialize drive—The ACU was unable to initialize one or more
devices.
12
Error occurred while creating logical drive—The ACU encountered an error
creating a logical drive.
13
Too many spare drives assigned—You attempted to assign more than the
maximum number of spare drives allowed for the specified logical drive.
14
Insufficient memory to run the application—There is not enough memory to
run the ACU.
15
Incorrect controller number—The controller number you specified is invalid or
out-of-range.
16
Controller not responding—The controller has stopped responding to the ACU.
17
Build/Verify/Clear failed—The build/verify or clear running on one or more
logical drives has failed.
100
You ran ACU and made changes—The ACU exited with no errors (success) and
you must restart the computer.
Playback and Record Notes
When using ACU in playback or record mode, note the following:
•
When recording a logical drive, the ACU does not create a Wait keyword within an
logical drive’s definition block in a script file.
When playing back any script file generated from the ACU record option, the ACU
uses the default setting Wait=Yes when creating a logical drive unless you first edit
the script file and include a Wait=No line in the logical drive’s definition block.
•
When recording a RAID 10, the ACU cannot map spare drives assigned to the
individual mirror sets to the HotspareDrives list in the resultant script file. The
script file syntax allows only a single list of spare drives to be assigned to any
given logical drive.
In this case, the ACU creates the HotspareDrives list using all the drives assigned
to the lower-level mirror set logical drives within the RAID 10. When playing back
this script, the ACU assigns all the drives in the HotspareDrives list to all the mirror
set logical drives making up the RAID 10. However, this might not exactly match
the original spare drive assignments to the mirror set logical drives.
Chapter 8. Using the Array Configuration Utility for DOS
89