Download 326X Series Modem Reference Guide

&V, *ST
Table 1-3.
Status Summary Line (Continued)
Message
Definition
61 = Lease Line Test Passed
62 = Security – No Callback Number provided
63 = Security Failure – Manager timeout
64 = Security Failure – Invalid Callback Number
65 = Security Failure – Interdigit timeout
66 = DTE Inactive
67 = Restoral – ACU
68 = End Restoral – ACU
69 = Restoral – DTR ACU
70 = End Restoral – DTR ACU
71 = Restoral – ACU.116
72 = End Restoral – ACU.116
73 = LPDA2 Disconnect
74 = Remote disconnected without sending PSTN
75 = Configuration change cause disconnect
76 = Retraining time exceeded
TI
77 = Remote Access Reset
Test Indicator. The number displayed after TI tells you which test is in
progress. The numbers correspond to the following messages:
0 = No Test/End Test
1 = Local Digital Loopback Test
2 = Remote Digital Loopback Test
3 = Local Analog Loopback Test
4 = Reserved
5 = Busy Out
6 = Local Analog Loopback Pattern Test
7 = Remote Digital Loopback Pattern Test
8 = Pattern Test
A or O
9 = Retrain
Answer/Originate
A = Modem is in Answer mode
D or L
O = Modem is in Originate mode
Dial/Leased
D = Modem is using a dial telephone line
L = Modem is using a leased telephone line
1-40 AT Commands