Download AutovaxID Operations Manual

Biovest International, Inc.
5.2
Primary User Interface Screens
Main Menu
From the Monitor screen, press the Menu button to access the Main Menu screen (see
Figure 5-16). This screen displays six buttons that provide access to all process control
and user interface functions. The software part number and revision level is displayed at
the lower left of the screen. If they have been entered, the run name, cultureware lot
number, inoculant ID, and instrument name are displayed at the lower right (see
Sections 6.1.1 and 7.4.1). The Exit button will bring the user back to the Monitor screen.
The Logon button will only be available if user names and passwords are in use (see
Section 6.6).
Figure 5-16: Main Menu
5.3
Run Menu
Pressing the Run Menu button on the Main Menu screen will bring an authorized user to
the Run Menu screen. This is the primary screen to guide an operator through the
various steps of a cell culture run. When the instrument is in the IDLE state, the Run
Menu screen will contain a single button labeled “Start New Run” (see Figure 5-17) that,
when pressed, will allow an authorized user to start a cell culture run (see Section 7.4).
If a cell culture run is already in progress, the Run Menu screen will show two buttons:
“Continue Current Run” and “Stop Current Run” (see Figure 5-18). If the Continue
Current Run button is pressed, the user will be taken to the most current screen for the
current run state; if the Stop Current Run button is pressed, the user will be taken
through the steps required to terminate the run (see Section 7.22).
AutovaxID Operations Manual
5-19