1
Download M-Class Waveform Generator
Transcript
Name Description Output ECL Trigger State Command Sets or queries the unit VXIbus ECLTn line state. VXI only. The following considerations apply: Output ECL Trigger State Query • The ECLTn output source and polarity are selectable. • Each ECLTn line state is selected individually. • ECLT lines can be sourced and sensed simultaneously. Command Syntax OUTPut:ECLTrg<n>[:STATe] <state> Query Syntax OUTPut:ECLTrg<n>[:STATe]? Æ<state> Parameters Name Type Range <n> Discrete 0 1 <state> Discrete ON or 1 Enable OFF or 0 Disable ECLT0 ECLT1 Output Event Time Command Sets or queries the output event time. This is the length of time that event driven output pulses will stay high. The time is given in seconds. Output Event Time Query Command Syntax OUTPut:EVENt[:TIME] <seconds> Query Syntax OUTPut:EVENt[:TIME]? Æ <seconds> Parameters 0004-000074 Name Type Range <seconds> Float Time in seconds. MINimum 50 ns MAXimum 0.163 s 95
