Download Chapter 2 -- Air Conditioning Component Service

Transcript
56
A/C COMPRESSOR CLUTCH
Clutch Removal
NOTE: This procedure shows a compressor with six screws holding the dust cover on the clutch. Your
unit has three Torx ® screws for attaching the dust cover and only differs in this manner.
STEP 91
STEP 93
A21250
See this section for compressor removal. Clean the
external surfaces of the compressor before doing
any work on the compressor.
A21252
Remove the clutch dust cover.
STEP 94
STEP 92
A21253
A21251
Remove the three Torx® screws for the clutch dust
cover.
Remove the retaining nut for the front plate. Use the
special spanner wrench from the service tool set to
keep the plate and shaft from turning.