Download User`s Manual

Transcript
Settings
5.7 Display
zzz
Display settings
A combination of setting of the contrast and back light defines visibility and legibility of a
display. Display settings shall be defined in compliance with the conditions in which it will be
monitored. Economizing mode switches off back light according to the set time of inactivity.
Main menu ⇒ Settings ⇒ LCD ⇒ Contrast / Back light / Back light time off
Demo cycling period
It defines time in seconds for each displayed screen of measurements on LCD.
Main menu ⇒ Settings ⇒ LCD ⇒ Demo cycling period
Settings of customized screens
For easier and faster survey of measurements that are important for the user, three settings of
customized screens are available. Each customized screen displays three measurements. When
setting customized screens the designations are displayed in shorter form, with up to 4
characters. For survey of all designations see chapter Survey of supported measurements
regarding connection on page 59.
Example:
Desired result:
Customized screen 1
Customized screen 2
Customized screen 3
Average phase voltage
Av. Phase to phase volts
Voltage unbalance
Total current
Neutral current
Average current
Power angle (U1−I1)
Frequency
THD of power angle I1
Setting:
Main menu ⇒ Settings ⇒ LCD ⇒ Custom screen 1 / 2 / 3
Customized screen 1
Customized screen 2
Customized screen 3
Main menu ⇒ Measurements ⇒ Present values ⇒ Custom OK
⇔
40
⇔
User’s Manual