Download CATCH-X Users Manual
Transcript
Name PWR VME PRG ID color green yellow red green Table 12: LEDs on front panel. Description 5 V Power available Board is currently accessed through VME If lit the FPGA's are not correctly programmed '-' if FPGAs are not programmed. Otherwise shows the selected board address (lower 4 bits). TCS red Red, if the synchronisation clock is generated internally. O, if the clock is received through the TCS system. TRG green On if triggers are received from the TCS system. 24 yellow On if CATCH-Mezzanine card produces 24 bit data (e.g. from TDC) O, if 32 bit data is received (e.g. through HOTLink from RICH). OFF red On, if port 1,2,3 or 4 is disabled. IDs red On, if setup data is received on port 1-4 of the HOTlink-CMC. FF red On, if the FIFO on port 1-4 is full. 17