Download CATCH-X Users Manual

Transcript
Name
PWR
VME
PRG
ID
color
green
yellow
red
green
Table 12: LEDs on front panel.
Description
5 V Power available
Board is currently accessed through VME
If lit the FPGA's are not correctly programmed
'-' if FPGAs are not programmed.
Otherwise shows the selected board address (lower 4 bits).
TCS
red Red, if the synchronisation clock is generated internally.
O, if the clock is received through the TCS system.
TRG green On if triggers are received from the TCS system.
24
yellow On if CATCH-Mezzanine card produces 24 bit data (e.g. from TDC)
O, if 32 bit data is received (e.g. through HOTLink from RICH).
OFF
red On, if port 1,2,3 or 4 is disabled.
IDs
red On, if setup data is received on port 1-4 of the HOTlink-CMC.
FF
red On, if the FIFO on port 1-4 is full.
17