Download GLC2400 Series User Manual

Chapter 1 - Introduction
! GP Edit Mode Peripherals
GLC Unit
To an
Ethernet
Network
GLC2400-TC41-24V
(1)
GLC Interfaces
PLC Interfaces
(1) Ethernet
(9) RS-232C Port
(2) Flex Network
(10) RS-422 Port
(3) Printer
(11) Programming
(4) Tool Connector
Console Port
(5) Expansion Serial Interface
(6) CF Card
(7) Sound (AUX)
(8) Serial Cable
Logic Program
Development
Software
(4)
Data Transfer
Cable
GPW-CB02
(6)
CF Card
GP077-CF10
GP077-CF20
Personal
Computer *5
GP-PRO/PBIII
for Windows
software
CF Card Adaptor*6
GP077-CFAD10
*1 Compatible with NECPC-PR201/PL , EPSON ESC/P24-J84(C), HP Laser Jet PCL 4
command printers or their equivalent that are designed for MS-DOS. Printers designed
solely for Windows may not be used. Certain printers containing both Windows and DOS
drivers may be used. For details, please contact your printer's manufacturer or sales outlet.
*2 For information about compatible PLC types and software, please refer to
GP-PRO/PBIII for Windows PLC Connection Manual (included with the
screen creation software)
*3 For information about recommended units, please refer to the next page.
*4 Certain types and models of PLCs cannot be connected.
GP-PRO/PBIII for Windows PLC Connection Manual (included with the
screen creation software)
*5 For the full range of compatible PCs, refer to the following manual.
GP-PRO/PBIII for Windows Operation Manual (included with the screen
creation software)
*6 The total amount of the data of the CF Memory Loader Tool and Back-up Data will be over
8M . Use the GP077-CF20 (16MB) when you use the CF Memory Loader Tool.
GLC2000 Series User Manual
1-3