Download PMC-CPU/440 - esd electronics, Inc.
Transcript
PMC-CPU/440 7 PMC-Connectors Status: preliminary 7.3 PMC P4 I/O Connector P4 is used to interface many PMC-CPU/440 specific interfaces like the CAN buses, I2C and FPGAI/Os. esd offers a PMC-PIM module with two isolated CAN physical circuits. 7.3.1 Pinout Pin Signal Name Notes Signal Name Notes Pin 1 FPGA-IO<0> 3.3V, IO FPGA-IO<1> 3.3V, IO 2 3 FPGA-IO<2> 3.3V, IO FPGA-IO<3> 3.3V, IO 4 5 FPGA-IO<4> 3.3V, IO FPGA-IO<5> 3.3V, IO 6 3.3V, IO FPGA-IO<7..27> 3.3V, IO 8-28 7-27 FPGA-IO<6..26> 29 FPGA-IO<28> 3.3V, IO FPGA-IO<29> 3.3V, IO 30 31 FPGA-IO<30> 3.3V, IO FPGA-IO<31> 3.3V, IO 32 33 +5V (FPGA-IO<32>) PWR, 5V CAN0_TX (FPGA-IO<33>) 5V, O 34 35 n.c. (FPGA-IO<34>) (3.3V, IO) CAN0_RX (FPGA-IO<35>) 5V, I 36 37 n.c. (FPGA-IO<36>) (3.3V, IO) CAN1_TX (FPGA-IO<37>) 5V, O 38 39 n.c. (FPGA-IO<38>) (3.3V, IO) CAN1_RX (FPGA-IO<39>) 5V, I 40 41 n.c. (FPGA-IO<40>) (3.3V, IO) GND (FPGA-IO<41>) PWR, GND 42 43 GND (FPGA-IO<42>) PWR, GND n.c. (FPGA-IO<43>) (3.3V, IO) 44 45 n.c. (FPGA-IO<44>) (3.3V, IO) RxS1 RS232, I 46 47 RTSS1 RS232, O TxS1 RS232, O 48 49 CTSS1 RS232, I n.c. (FPGA-IO<45>) (3.3V, IO) 50 51 n.c. (FPGA-IO<46>) (3.3V, IO) GND (FPGA-IO<47>) PWR, GND 52 53 CLOCK_IN 5V, I CLOCK_OUT 3.3V, O 54 55 RESET_IN 5V, I RESET_OUT 3.3V, O 56 57 IRIG-B_R_IN 5V, I IRIG-B_R_OUT 3.3V, O 58 59 IRIG-B_R_P RS485+ CLOCK_EN 3.3V, O 60 61 IRIG-B_R_M RS485- RESET_EN 3.3V, O 62 63 IIC1-SDA 3.3V, IO IIC1-SCL 3.3V, IO 64 Notes: 1) Signal names and corresponding notes in braces are optional and only available in nonstandard configurations. 2) The PMC440-NGCC variant uses the optional FPGA-IO signals: FPGA-IO<32..47>. 3) FPGA-IO<33,35,37,39> have dedicated signal directions! 4) All FPGA-IO signals have 22 Ohm series resistors. 5) Above notes have the folloing meaning: ● 3.3V: 3.3V-only digital signal. These signals are not 5V tolerant. User Manual - V.2027.21 Filename: pmc440-me.odt Revision 1.1 2008-07-14 All rights reserved. Confidential! Copyright © esd gmbh 2008 Page 17 of 49