Download User manual

ENG
9.2 EVD Modules technical characteristics
Power supply
Classification according to protection against
electric shock
Case
Front protection rating with plastic case
Fire resistance category
Cleaning the module front panel
Operating conditions
Storage conditions
PTI of insulating materials
voltage: 230 V~ (+10/-15%), 50/60 Hz; power: 4,5kW max.
NOTE: The maximum simultaneous current draw by all the loads connected to the controller and the
expansion modules must not exceed 20 A.
Class II
plastic, dimensions 128x290x110 mm
IP65
category D
only use neutral detergents and water
-10T40°C, <90% r.H. non condensing
-20T60°C, <90% r.H. non condensing
printed circuits 250, plastic and insulating materials 175
Tab. 9.b
9.3 Power Modules technical characteristics
Power supply
Residual current circuit breaker
Power relay
Classification according to protection against electric shock
Case
Front protection rating with plastic case
Fire resistance category
Cleaning the module front panel
Operating conditions
Storage conditions
voltage: 230 V~ (+10/-15%), 50/60 Hz; power: 4,5kW max.
NOTE: The maximum simultaneous current draw by all the loads connected to the controller and
the expansion modules must not exceed 20 A
In=20 A @30 °C, Id=300 mA
Rating: 30 A resistive, 240 Vac; 3HP 240 Vac
Class II
plastic, dimensions 128x290x110 mm
IP65
Category D
only use neutral detergents and water
-10T40°C, <90% r.H. non condensing
-20T60°C, <90% r.H. non condensing
Tab. 9.c
9.4 3PH EVAPORATOR Modules technical characteristics
Power supply
Classification according to protection against electric shock
Case
Weight
Front protection rating with plastic case
Cleaning the module front panel
Operating conditions
Storage conditions
Materials
voltage: 400V~(+10/-15%), 50/60Hz, 3PH+N+T, Imax 25A
Class I
plastic, dimensions 452x380x186 mm
8,7 Kg
IP65
only use neutral detergents and water
-10T40°C, <90% r.H. non condensing
-20T60°C, <90% r.H. non condensing
frontal cover in polycarbonate, retro box in technopolymer
Tab. 9.d
9.4.1
Electrical characteristics
Code
General
Main switch / general protection
Loads power supply
Insulating transformer
Status and alarm indication
Input
Main defrost probe
Auxiliary evap. defrost probe
Clicson evaporator
Thermostat evaporator
Output
Condensing unit enabling / Solenoid valve
Defrost heaters
Evaporator fans
AUX1 output
Ultra 3PH Evaporator module 6kW
WT00E60N00
Ultra 3PH Evaporator module 9kW
WT00E90N00
4 poles magnetothermic 16A 6kA D
400V~(±10%), 50/60Hz, 3PH+N+T
PRI 230 Vac
SEC1 230 Vac 40VA
SEC2 24 Vac 35VA
Protection SEC by fuses
By UltraCella
4 poles magnetothermic 25A 6KA D
400V~(±10%), 50/60Hz, 3PH+N+T
PRI 230 Vac
SEC1 230 Vac 40VA
SEC2 24 Vac 35VA
Protection SEC by fuses
By UltraCella
NTC 10kΩ
NTC 10kΩ
Present
Present
NTC 10kΩ
NTC 10kΩ
Present
Present
8A (AC1) / 2A (AC23) 1PH
6kW, 9A (AC1) 3PH
0,55kW, 1,5A* (AC23) 3PH
0…10Vdc
16A (AC1) 1PH
8A (AC1) / 2A (AC23) 1PH
9kW, 13A (AC1) 3PH
2kW, 5,7A* (AC23) 3PH
0…10Vdc
16A (AC1) 1PH
Tab. 9.e
* Rating with cosφ=0,5;
With different power factor, to calculate the rating consider the formula: I = P / (400 * √3 * cosφ) where P is the power in W
75
UltraCella +0300083EN - rel. 1.6 - 31.10.2015