Download Software User Manual

- 3-21 -
3.11 Zooming & Panning in View mode
When in View mode, the vehicle position marker can be manually moved to any desired
position, as it is no longer determined by the GPS system.
The lateral position of the marker can be changed (Panning), so that a different view of an
area can be seen, particularly when zooming in.
To make any change to the presented view position, first touch the screen at the point where
you would like the next view to be center, so that the vehicle position marker moves to that
point. Then press either the Zoom In or Zoom Out buttons from the View menu (Fig 3.7). The
redraw of the map screen will be done with the view center on the new position, zoomed
appropriately.
3.12 Viewing Layer Information
Layers can be opened, to access information about the objects stored within them.
To open a layer, select the LAYERS button from the FARM menu.
Figure 3.8 The FARM menu
If there is more than one layer in the paddock, select the layer to view, by pressing the Layer
Number button in the Edit Layers dialog window. Then press the DETAILS button.
Figure 3.9 - The Edit Layers window