Download Leica RoadRunner Technical Reference Manual

Staking the centre line
Description
1.
The General page. On this page you define the
point ID, reflector height for TPS, antenna height
for GPS, at which chainage your stake-out should
start, which chainage increment should be used
and stake offsets.
Enter a point ID Point ID: CL001.
Enter the reflector height Reflector Ht:, for TPS
Enter the antenna height Antenna Ht:, for GPS
Enter Def Chainage: 0.000. The chainage for the
first point you stake out is zero.
Enter Ch Increment: 5.000. No increment is
required if staking random chainages.
Leave Stake Offset: and Stake Ht Diff: at 0.
Press PAGE (F6) to change to the Stake page.
2.
The Stake page. you see the difference between
the current position and the position to stake out.
The bulls eye on the right hand side gives you a
graphical feedback of your position relative to the
point to stake out.
As Orientation: To Alignment has been chosen
in Configuration the bulls eye is relative to the
centreline.
Quick Start Tutorial (Advanced Mode)
RoadRunner
331