Download Leica RoadRunner Technical Reference Manual

Introduction
RoadRunner
4
Softkey
Description of Softkey
SHIFT CONEC (F3)
and
SHIFT DISCO (F3)
To dial the number of the reference station configured in
the active configuration set and to hang up immediately
after the survey is completed. Available for OCUPY (F1)
or STORE (F1) being displayed and for real-time devices
of type digital cellular phone or modem. Available for
Auto CONEC: No in CONFIGURE GSM Connection.
SHIFT INIT (F4)
To select an initialisation method and to force a new
initialisation. Available for OCUPY (F1) or STORE (F1)
being displayed and for configuration sets allowing phase
fixed solutions. Refer to the "Technical Reference
Manual".
The following main softkeys refer to TPS1200 and RX1250 in TPS mode
They have the same functions in all manuals referring to TPS1200, RX1250.