Download Precision LCR Meter

PROGRAMMING
0.005~1.275
(5 characters, including a 5mV~1.275
decimal)
Example
MAIN:VOLT 0.005<^END^M>
Query Syntax
Returns Auto mode as the current measurement
mode.
Sets the test signal voltage to 5mV.
START
MAIN:VOLT?<^END^M>or<^J^M>
Starts a measurement in manual mode.
Return String
<string>
Voltage
MAIN:VOLT :< variable ><^END>
(<variable >= 0.005~1.275)
Returns the test voltage.
Query Example
LCR-800 User Manual
MAIN:VOLT?<^END^M>
MAIN:VOLT 0.005<^END>
Command
Syntax
MAIN:STAR<^END^M>or<^J^M>
Example
MAIN:STAR<^END^M>
Starts the measurement
RANGE HOLD
Returns the test voltage (5mV)
AUTO/MANU
Command/Query
Turns range hold on or off or queries the range hold status.
Command/Query
Syntax
MAIN:R.H.:<string><^END^M>or<^J^M>
Parameter
Sets automatic or manual measurement mode.
<String>
Range hold
Syntax
OFF.
Off
ON..
On
MAIN:TRIG:<string><^END^M>or<^J^M>
Parameter
<String>
Test mode
AUTO
Automatic mode
MANU
Manual mode
Example
Query Syntax
Example
Turn range hold off
Query Syntax
MAIN:R.H.?<^END^M>or<^J^M>
MAIN:TRIG:MANU<^END^M>
Return String
Sets the measuring mode to manual
<string>
Range Hold status
MAIN:TRIG?<^END^M>or<^J^M>
MAIN:R.H.:OFF.<^END>
Range hold is off
MAIN:R.H.:ON..<^END>
Range hold is on
Return String
<string>
Voltage
MAIN:TRIG:AUTO<^END>
Returns automatic mode
MAIN:TRIG:MANU<^END>
Returns manual mode
Query Example
MAIN:R.H.:OFF.<^END^M>
Query Example
MAIN:R.H.?<^END^M>
MAIN:R.H.:ON..<^END>
Returns the Range Hold status (On)
MAIN:TRIG?<^END^M>
MAIN:TRIG:AUTO<^END>
95
96