1
Download TC1765 User`s Manual Peripheral Units
Transcript
TC1765 Peripheral Units General Purpose Timer Array (GPTA) Global Timer Input Multiplexer Control Registers Note: These registers are not directly accessible and can be written and read only via the multiplexer register array FIFO as described in Section 6.1.5.6 Two registers, GIMCRL and GIMCRH, are assigned to each GTCG[3:0]. GIMCRL controls the connections of cells 0 to 3 in a GTC Group. GIMCRH controls the connections of cells 4 to 7 in a GTC Group. GIMCRLg (g = 3-0) Input Multiplexer Control Register for Lower Half of GTC Group g Reset Value: 0000 0000H 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 GIM EN3 GIMG3 0 GIML3 GIM EN2 GIMG2 0 GIML2 rw rw r rw rw rw r rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 GIM EN1 GIMG1 0 GIML1 GIM EN0 GIMG0 0 GIML0 rw rw r rw rw rw r rw 16 0 GIMCRHg (g = 3-0) Input Multiplexer Control Register for Upper Half of GTC Group g Reset Value: 0000 0000H 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 GIM EN7 GIMG7 0 GIML7 GIM EN6 GIMG6 0 GIML6 rw rw r rw rw rw r rw 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 GIM EN5 GIMG5 0 GIML5 GIM EN4 GIMG4 0 GIML4 rw rw r rw rw rw r rw User’s Manual 6-136 16 0 V1.0, 2002-01
