Download JPD100PLO USER`S MANUAL

PRIMARY CONTROL CAMERA
Camera #>ENTER
or
Camera#>CNTL
#
ENTER
#
CNTL
The JPD-100/P sends a command to the switcher to switch the
selected camera to the monitor currently displayed on the JPD-100/P
Controller.
NOTE
If the CCU-100/B or MSI-100 has been
programmed (camera controller partitioning) to
deny the controller access to a camera; when
the operator selects that camera, the message
"Request Denied" appears on the second line
of the JPD-100/P display.
CNTL - CAM 1
Request Denied
MON 1
NOTE
If a camera number is displayed on the first
line of the JPD display, but the operator cannot
manually control that camera, press the CNTL
key to get manual control (if the controller has
access capability).
The controller loses
manual control when more than one JPD100/P is addressed to the same camera or
when a MultiCall calls the camera addressed
by the JPD-100/P.
518007-4960
2-16
KEMU040020
April 25, 2001