Download User Manual

6-7. GRAPH
1) GRAPH (1 / 6)
(Shortcut key:
→
→
-“
” Select the saved pattern.
-“
” Copy the saved pattern.
)
1-1) Pattern Select
: Refer to 6-3 Input Pattern Select.
1-2) Pattern Copy
: Refer to 6-3 Input Pattern Copy.
2) GRAPH (2 / 6)
- Set up the minimum-maximum values of the XY axles on the
graph screen.
-“
” Set up the Y-axle display start point value.
-“
” Set up the Y-axle display maximum value.
-“
” Set up the X-axle display start point value.
-“
” Set up the X-axle display maximum value.
- The value setup is available by using the touch keys on the graph screen.
- Touching
on the figure, it is converted to the key input
screen and the values of each point can be set up.
23